DEMO FLIGHT: NEW Graupner ALPHA 300Q 3D HOTT (ARF) Race Copter

Share it with your friends Like

Thanks! Share it with your friends!


Thanks to EmpireRC for this demo flight! SKU: Alpha-300Q-3D-ARF Weight: 2.2 lbs. See below for full details.

• Frame: 0.12″ (3mm) thick carbon motor frames, and 0.078″ (2mm) thick carbon chassis
• Receiver: FPV 2.4GHz GR-18, 9-channel receiver with built-in
telemetry (altitude, voltage, RF signal strength, RX temperature)
• Brushless Motors: Two clockwise and two counter clockwise rotating 2300Kv
• ESCs: Four 20A ultra brushless, high-frequency switching with Open Source BL heli software, Smart BEC (SBEC) with voltage telemetry
• LED Lights: High-intensity mounted fore and aft to assist with
• Flight Modes: Selectable from beginner to expert

• Alpha 300Q Race Quadcopter
• S1019 GR-18 Receiver with Integrated Flight Control
• Four 2809/2300Kv Brushless Motors
• Four 20A ESCs,
• Four 6″ 3D Props
• Instruction Manual

LiPo Battery: 3S
LiPo Battery Charger and Charging Bag
Graupner HoTT Transmitter with at least 5 channels

• Width: 14.4″ (366mm)
• Height: 3.3″ (83mm) approximate
• Empty Weight: 18.1oz (460g)
• Weight w/3S 1500mAh Battery: 21oz (600g)
• Length: 9.4″ (240mm) excluding rotor
• Fuselage Width: 9.5″ (241mm) excluding rotor
• Overall Length: 14.4″ (365mm) approximate
• Rotor Diameter: 6.02″ (153mm)
• Axle Distance: 11.8 x 11.8″ (30 x 30cm)
• Arms: 3.9 x 1.2″ (10 x 3cm)
• Arm Thickness: 0.12″ (3mm)


Write a comment